
Add to Cart
Single Output 500W
Description:
Low cost
Built-in EMI filter
Low output ripple&noise
Approvals: UL,CE
Protections: Over load/Short circuit
2 years warranty
Technical Data
Index Type |
SP-500-12 |
SP-500-13.5 |
SP-500-15 |
SP-500-24 |
SP-500-27 |
SP-500-48 |
DC Voltage |
12V |
13.5V |
15V |
24V |
27V |
48V |
Voltage Tolerance |
¡À2% |
¡À2% |
¡À1% |
¡À1% |
¡À1% |
¡À1% |
Rated Current |
40A |
36A |
32A |
20A |
18A |
10A |
CurrentRange |
0-40A |
0-36A |
0-32A |
0-20A |
0-18A |
0-10A |
Ripple&Noise(Max.) |
240mVp-p |
240mVp-p |
240mVp-p |
240mVp-p |
200mVp-p |
300mVp-p |
Line Regulation |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
Load Regulation |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
Rated Power |
480W |
486W |
480W |
480W |
486W |
480W |
Efficiency |
84% |
84% |
83% |
85.5% |
86.5% |
87% |
Voltage Adjust Range |
10-13.2V |
12-15V |
13.5-18V |
20-26.4V |
24-30V |
41-56V |
VoltageRange |
88¡«264VAC 47-63Hz;124¡«370VDC |
|||||
AC Current |
7A/115V 3.5A/230V |
|||||
Inrush Current(Max.) |
18A/115V 36A/230V |
|||||
Leakage Curr, ent |
<3.5mA/240VAC |
|||||
Overload Protection |
105-135% TYPE£ºCurrent limitation¡¡auto recovery |
|||||
Over-voltage Protection |
13.8-16.2V |
15.5-18.2V |
18-21V |
27.6-32.4V |
31-36.5V |
57.6-67.2V |
Over-temperature Protection |
¡Ý55¡æFAN ON ¡Ü45¡æFAN OFF ¡Ý70¡æ OUTPUT CUTOUT |
|||||
Temp.Coefficient |
¡À0.03%/¡æ(0¡«50¡æ) |
|||||
Setup.Rise, Hold Time |
1.5s, 50ms, 20ms |
|||||
Vibration |
10¡«500Hz, 2G 10min, /11cycle, 60min, each axes |
|||||
Withstand Voltage |
I/P-O/P:3KVACI/P-FG:1.5KVACI/P-FG:0.5KVAC |
|||||
Isolated Resistor |
I/P-O/P, I/P-FG, I/P-FG:500VDC/100M¦¸ |
|||||
¡¡¡¡Working Temp.Humidity |
-10¡æ¡«+50¡æ, 20%¡«90RH |
|||||
¡¡¡¡Storage Temp.Humidity |
-20¡æ¡«+85¡æ, 10%¡«95%RH |
|||||
¡¡¡¡Dimension |
185¡Á120¡Á93mm |
|||||
¡¡¡¡Weight |
1.8kg |
|||||
¡¡¡¡Safety Standards |
UL1950 |
|||||
¡¡¡¡EMC |
CISPR22(EN 55022), IEC1000-4, 2, 3, 4, 5, 6, 8, 11 IEC1000-3-2 |
Note£º
1.All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25 of ambient temperature.
2.Tolerance:includes set up tolerance, line regulation and load regulation
3.Ripple&noise are measured at 20MHZ of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.
4.Line regulation:min&max voltage of the rated load.
5.Load regulation:load from 0 to 100%.