Changzhou Chuangwei Motor & Electric Apparatus Co., Ltd,
Changzhou Chuangwei Motor & Electric Apparatus Co., Ltd. Specializes in production and development of step motor and driver
Add to Cart
Power Supply 40W Single Output
Description:
Low cost
Built-in EMI filter
Low output ripple&noise
Approvals: UL,CE
Protections: Over load/Short circuit
2 years warranty
Technical Data
|
Index Type |
S-40-5 |
S-40-12 |
S-40-15 |
S-40-24 |
|
DC Voltage |
5V |
12V |
15V |
24V |
|
Voltage Tolerance |
¡À2% |
¡À1% |
¡À1% |
¡À1% |
|
Rated Current |
8A |
3.5A |
2.8A |
1.8A |
|
CurrentRange |
0-8A |
0-3.5A |
0-2.8A |
0-1.8A |
|
Ripple&Noise(Max.) |
75mVp-p |
100mVp-p |
100mVp-p |
100mVp-p |
|
Line Regulation |
¡À0.5% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
|
Load Regulation |
¡À1% |
¡À0.5% |
¡À0.5% |
¡À0.5% |
|
Rated Power |
40W |
42W |
42W |
43W |
|
Efficiency |
72%/115VAC |
76%/115VAC |
76%/115VAC |
78%/115VAC |
|
Voltage Adjust Range |
+10 -5% |
¡À10% |
¡À10% |
¡À10% |
|
VoltageRange |
85¡«264VAC 47¡«63Hz;120¡«370VDC |
|||
|
AC Current |
1.2A/115V 0.6A/230V |
|||
|
Inrush Current(Max.) |
Cold start current¡¡30A/115V 60A/230V |
|||
|
Leakage Current |
<1mA/240VAC |
|||
|
Overload Protection |
105%¡«150%TYPE£ºOUTPUT CUTOUT¡¡AUTO RECOVERY |
|||
|
Over-voltage Protection |
115%-135% |
|||
|
Over-temperature Protection |
...................... |
|||
|
Temp. Coefficient |
¡À0.03%/¡æ(0¡«50¡æ) |
|||
|
Setup.Rise, Hold Time |
800ms, 50ms, 15ms/115VAC 300ms, 50ms, 60ms/230VAC |
|||
|
Vibration |
10¡«500Hz, 2G 10min, /1cycle, 60min, each axes |
|||
|
Withstand Voltage |
I/P-O/P:3KVACI/P-FG:1.5KVACI/P-FG:0.5KVAC |
|||
|
Isolated Resistor |
I/P-O/P, I/P-FG, I/P-FG:500VDC/100M¦¸ |
|||
|
Working Temp.Humidity |
-10¡æ¡«+60¡æ(REFER TO CHARACTER CURVE), 20%¡«90RH |
|||
|
Storage Temp.Humidity |
-20¡æ¡«+85¡æ, 10%¡«95%RH |
|||
|
Dimension |
129¡Á98¡Á38mm |
|||
|
Weight |
0.45Kgs |
|||
|
Safety Standards |
UL1012 TUB60950(IEC950, UL1950) |
|||
|
EMC |
CISPR22(55022), IEC801-2, 3, 4, IEC555-2 |
|||
Note£º
1.All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25 of ambient temperature.
2.Tolerance:includes set up tolerance, line regulation and load regulation
3.Ripple&noise are measured at 20MHZ of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.
4.line regulation:min&max voltage of the rated load.
5.load regulation:load from 0 to 100%.